WiFi UART
The module creates a transparent bridge between the WiFi network and the serial port. Supported in the SimpleBGC32 mobile applications (iOS implemented, Android will be implemented in next release).
The module is based on the ESP-12E and inherits all of its features.
Pre-loaded by the open-source firmware esp-link.
Specifications
Protocols | 802.11 b/g/n |
Frequency range | Wi-Fi 2.4 GHz |
Encryption | WPA/WPA2, WEP/TKIP/AES |
Operation modes | station/softAP/station+softAP |
Output power | +20dBm in 802.11b mode |
Operating temperature range | -40°C ~ 125°C |
Operating current | average value 80 mA, max. value 170 mA |
Dimensions | 30×20 mm |
Weight | 3.68 g |
Pre-configured parameters:
Network name: SBGC_WiFi
IP and port for UART bridge: 192.168.4.1, port 23
Module may be configured by the web interface, running at http://192.168.4.1/wifi/wifiAp.html
Downloads
CAD drawing (1Mb 18.04.2017)
Support
Type your question or comment below. Answer will be sent at your E-mail within 24 hours on workdays.